GFM Network News

More News →

Combines

New 6000 series straw-walker combines from CLAAS
Machinery, News

New 6000 series straw-walker combines from CLAAS

The redesign offers higher capacity and improved straw quality

By
German ag equipment manufacturer Claas has been steadily growing its presence in Canada and the United States for several years now. The yellow paint scheme once used on its combines sold here was the result of a joint marketing partnership between Claas and Caterpillar. However, the companies parted ways a long time ago, and Claas […] Read more
An OFX widget is now available for farmers perusing AgDealer’s online listings. (GFM staff photo)
General, Machinery

AgDealer plugs into forex service provider

Listing site to offer currency exchange service on cross-border purchases

By ,
Farmers buying used iron internationally by way of AgDealer are getting access to what’s billed as a lower-cost option to handle the currency exchange. AgDealer, Canada’s largest used farm equipment shopper publication and online listing platform, announced a partnership Tuesday with OFX Group, an Australian-based online currency exchange provider. Farmers, distributors and buyers outside of […] Read more
For X series combines, 12-, 16- and 18-row CF folding corn heads are available and 12-row heads are available for S series combines.
Equipment, Machinery

New combine header line from John Deere

Updated header options for X, S and T series combines

By
Ever since the initial introduction of the S series models, John Deere engineers have been offering buyers additional ability to spec out green combines to better suit either corn and beans or small grains crops. And this year, Deere has gone another step further with the introduction of a completely new group of headers tailored […] Read more
GrainViz engineer Braden Pierce explains the system to farmers at Ag Days at Brandon, Man. in 2018. (Screengrab from GFM/Greg Berg video)
Crops, Machinery

Agco to buy GrainViz system’s Winnipeg developer

System due out in limited release this fall

By ,
U.S. farm machinery firm Agco has set up a deal to buy its Winnipeg partner in the development of the GSI GrainViz grain monitoring system. Georgia-based Agco announced Friday it now has an agreement to acquire 151 Research, with which it had signed an “exclusive technology partnership” back in December 2018 to develop the GrainViz […] Read more
A Redekop MAV Straw Chopper mounted to a Claas Lexion combine.
Machinery

Residue management innovations from Redekop, New Holland, Case IH

The latest straw chopper technologies offer increased spreader widths, finer cuts, more efficiencies and in-cab controls

By
For farmers who practice low-till or no-till, residue management is essential. “We’re leaving a lot more residue on the field and that residue brings some benefits because it traps moisture and reduces erosion,” explains Trevor Thiessen, president and co-owner of Redekop Manufacturing in Saskatoon. “If straw is not chopped finely and spread evenly, it can […] Read more
(Mazergroup video screengrab via YouTube)
General, Machinery

New Holland ultra-dealer expands Saskatchewan reach

Mazergroup takes up Dave Marshall's three operations

By ,
Manitoba New Holland ultra-dealership Mazergroup is expanding its reach further into eastern Saskatchewan with a deal to buy three dealerships there. Brandon-based Mazergroup announced Tuesday it has assumed ownership of Yorkton New Holland, Raymore New Holland and Watrous New Holland, effective Sept. 1. The three operations’ dealer principal, David Marshall, had bought the former Bolt […] Read more
John Deere's X9 combine and C16F folding corn head can harvest up to 7,200 bushels per hour of high-yielding corn, the company says.
Machinery

John Deere announces new high-capacity X series combines

The X9 combines increase threshing capacity in all crop conditions while using less fuel

By
Two new models of John Deere combines will be rolling off the production line for the 2021 harvest season. The X9 1000 and X9 1100 combines were engineered to offer broadacre farmers greater efficiency, especially when threshing in dense crops like canola and tough wheat. The X9 1100 boasts it can harvest up to 30 […] Read more
Chris Plett of CPC Ag Repair points out a common failure point on the unloading system when harvesting wet grain.
Equipment, Machinery

Is your combine field ready?

There are common fail points and things to check on combines following a wet harvest

By
I can still hear it, the sound got louder and more prominent as we fought our way through the last days of the 2019 harvest season. One of the bearings on our straw chopper was nearing the end of its life, and luckily held together until the shards of the very last soybean stalk had […] Read more
Suzanne Heywood. (CNHIndustrial.com)
Crops, Machinery, Reuters

CNH Industrial replaces CEO, sticks with spinoff plan

Chairman Suzanne Heywood becomes interim CEO; CFO also leaving

By
Updated, March 24 — Milan | Reuters — The chief executive of CNH Industrial is leaving with immediate effect, the industrial vehicle maker said on Monday, less than two months after a profit warning. CNH said board chair Suzanne Heywood would replace Hubertus Muhlhauser as CEO until a permanent replacement was found. A source close […] Read more
(CervusEquipment.com)
Crops, Machinery

Cervus to expand Saskatchewan reach

Deere chain announces Nipawin shop, Farm At Hand tie-in

By ,
Deere farm equipment dealer chain Cervus Equipment is set to expand its reach in northeastern Saskatchewan next month. Calgary-based Cervus — which operates 21 Deere dealerships in Alberta, Saskatchewan and British Columbia along with 42 other machinery dealerships in Canada, Australia and New Zealand — announced Thursday it plans to have a new dealership open […] Read more

AgCanadaTV

AGCanadaTV: In case you missed it; your national ag news recap for Sept. 5, 2025

Sponsored By:
More Videos →

Cyber-Savvy Farmer

Glacier Farmmedia Podcast

Latest Market News

More Market News →